The Oil & Gas Hub

Learning Info

Deepest Hole
18.01.2020
818
Deepest Hole
Today, the deepest hole ever created by mankind lies beneath the tower on Russia’s Kola Penins…
Coiled Tubing Schematic
16.01.2020
1 068
Coiled Tubing Schematic
In the oil and gas industries, coiled tubing refers to a very long metal pipe, normally 1" to 3…
Production Zone Perforating
16.01.2020
647
Production Zone Perforating
Since the pay zone is sealed off by the production string and cement, perforations must be made in o…
Underbalanced drilling vs Conventional drilling
16.01.2020
588
Underbalanced drilling vs Conventional drilling
Underbalanced drilling, or UBD, is a procedure used to drill oil and gas wells where the p…
How do you apply and measure makeup torque?
15.01.2020
566
How do you apply and measure makeup torque?
Most drilling rigs have catheads on each side of the drawworks which are used to apply line pull to…
How do we control hole angle?
14.01.2020
801
How do we control hole angle?
Most people today use a packed hole assembly to overcome crooked hole problems and the pendulum is u…
BOP Accumulators
13.01.2020
615
BOP Accumulators
What you see in this photo is an accumulator. It is one of the most important part of blow out preve…
Temperature Conversion Table
09.01.2020
511
Temperature Conversion Table
Useful professional temperature conversion table: Fahrenheit and Celsius. Also included in…
What is hevi-wate drill pipe?
04.01.2020
695
What is hevi-wate drill pipe?
Hevi-Wate drill pipe is an intermediateweight drill stem member. It consists of heavy-wall tubes att…
Type of bearing
01.01.2020
526
Type of bearing
Most common type of bearings that using in oil & gas industry.
Type of Springs
31.12.2019
296
Type of Springs
Type of Springs which are mostly using in the Oil & Gas Industry!
Type of Flanges
30.12.2019
890
Type of Flanges
More than 30 useful types of flanges. Very interesting flanges chart.
1 2 3 … 7 8 9 10 11 12 13 14