Learning Info

Hand Tool: Wrench Size Chart
06.05.2017
3 550
Hand Tool: Wrench Size Chart
Wrench Size Chart
Drilling Rig Rotary System
04.05.2017
14 038
Drilling Rig Rotary System
The rotary system includes all of the equipment used to achieve bit rotation. Originally, the main d…
Drilling Fluid Classifications: Pneumatic Fluids
02.05.2017
3 197
Drilling Fluid Classifications: Pneumatic Fluids
Pneumatic (air/gas based) fluids are used for drilling depleted zones or areas where abnormally low…
Drilling Fluid Classifications
02.05.2017
3 399
Drilling Fluid Classifications
 Drilling fluids are separated into three major classifications: •  Pneumatic&nb…
Casing Handling Tools
29.04.2017
11 871
Casing Handling Tools
A wide variety of the elevator and spider assemblies are available to run casing. Some elevators are…
Casing Size Selection
29.04.2017
5 420
Casing Size Selection
Once the setting depths have been determined the next step is obviously to select the sizes of the c…
Standard Gravity
28.04.2017
820
Standard Gravity
In the preceding formula, the specific weight is determined from the specific mass using the local a…
API 8-rd Connections
28.04.2017
9 591
API 8-rd Connections
The most common type of casing connection in use is the API 8-rd connection, where 8-rd means 8-roun…
Casing Grades
25.04.2017
6 885
Casing Grades
Casing is manufactured in several different grades. Grade is a term for classifying casing by streng…
Commonly Used Bit Sizes That Will Pass Through API Casing
25.04.2017
8 125
Commonly Used Bit Sizes That Will Pass Through API Casing
You may need to use the following below table to determine bit size and casing size. 
Casing Joint Length
25.04.2017
5 781
Casing Joint Length
The lengths of casing joints vary. In the manufacture of seamless casing, it all depends...
Casing Dimensions
25.04.2017
6 437
Casing Dimensions
Casing comes in odd assortment of diameters ranging from 4.-in. to 20-in. that may seem...
1 2 3 … 9 10 11 12 13 14 15