Learning Info

Iron roughneck
20.01.2018
1 609
Iron roughneck
An integral part of the drilling process, iron roughnecks connect and disconnect drill pipe. Whether…
Hydraulic fracturing
19.01.2018
1 313
Hydraulic fracturing
Hydraulic fracturing produces fractures in the rock formation that stimulate the flow of natural gas…
Deepest Hole
18.01.2018
9 158
Deepest Hole
Today, the deepest hole ever created by mankind lies beneath the tower on Russia’s Kola Penins…
Coiled Tubing Schematic
16.01.2018
16 754
Coiled Tubing Schematic
In the oil and gas industries, coiled tubing refers to a very long metal pipe, normally 1" to 3…
Production Zone Perforating
16.01.2018
2 708
Production Zone Perforating
Since the pay zone is sealed off by the production string and cement, perforations must be made in o…
Underbalanced drilling vs Conventional drilling
16.01.2018
4 023
Underbalanced drilling vs Conventional drilling
Underbalanced drilling, or UBD, is a procedure used to drill oil and gas wells where the p…
How do you apply and measure makeup torque?
15.01.2018
4 089
How do you apply and measure makeup torque?
Most drilling rigs have catheads on each side of the drawworks which are used to apply line pull to…
How do we control hole angle?
14.01.2018
3 178
How do we control hole angle?
Most people today use a packed hole assembly to overcome crooked hole problems and the pendulum is u…
BOP Accumulators
13.01.2018
4 616
BOP Accumulators
What you see in this photo is an accumulator. It is one of the most important part of blow out preve…
Temperature Conversion Table
09.01.2018
3 652
Temperature Conversion Table
Useful professional temperature conversion table: Fahrenheit and Celsius. Also included in…
What is hevi-wate drill pipe?
04.01.2018
4 622
What is hevi-wate drill pipe?
Hevi-Wate drill pipe is an intermediateweight drill stem member. It consists of heavy-wall tubes att…
Type of bearing
01.01.2018
2 402
Type of bearing
Most common type of bearings that using in oil & gas industry.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15