OIL & GAS INFORMATION PORTAL

Learning Info

Drilling Elements That Affect Hole Cleaning
28.01.2018
1 920
Drilling Elements That Affect Hole Cleaning
Critical elements that can affect hole cleaning include the following: • Hole angle of the int…
Largest oil spills
27.01.2018
1 739
Largest oil spills
Oil spills at sea are generally much more damaging than those on land, since they can spread for hun…
Types of steel shape
26.01.2018
2 840
Types of steel shape
All Information about steel shapes.
The Well Tractor
24.01.2018
1 962
The Well Tractor
In a horizontal or deviated well, gravity typically assists tools in angles up to 70º. Beyond t…
The three stages of cyclic steam stimulation used for heavy oil and oil sands.
22.01.2018
1 325
The three stages of cyclic steam stimulation used for heavy oil and oil sands.
The three stages of cyclic steam stimulation used for heavy oil and oil sands.
Iron roughneck
20.01.2018
744
Iron roughneck
An integral part of the drilling process, iron roughnecks connect and disconnect drill pipe. Whether…
Hydraulic fracturing
19.01.2018
614
Hydraulic fracturing
Hydraulic fracturing produces fractures in the rock formation that stimulate the flow of natural gas…
Deepest Hole
18.01.2018
3 369
Deepest Hole
Today, the deepest hole ever created by mankind lies beneath the tower on Russia’s Kola Penins…
Coiled Tubing Schematic
16.01.2018
10 117
Coiled Tubing Schematic
In the oil and gas industries, coiled tubing refers to a very long metal pipe, normally 1" to 3…
Production Zone Perforating
16.01.2018
1 612
Production Zone Perforating
Since the pay zone is sealed off by the production string and cement, perforations must be made in o…
Underbalanced drilling vs Conventional drilling
16.01.2018
1 589
Underbalanced drilling vs Conventional drilling
Underbalanced drilling, or UBD, is a procedure used to drill oil and gas wells where the p…
How do you apply and measure makeup torque?
15.01.2018
1 981
How do you apply and measure makeup torque?
Most drilling rigs have catheads on each side of the drawworks which are used to apply line pull to…
1 2 3 4 5 6 7 8 9 10 11 12